Description | European standards | Other standards |
JOINTED test finger |
EN 60529 FIG. 1 EN 61032 FIG. 2 EN 60335-1 EN 60335-1/A13 23-50 FIG. 21 |
iec 60529 iec 61032 IEC 884-1 |
JOINTED TEST FINGER | EN 60335-2-64 Fig. 1 | |
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50 N |
EN 60950 EN 60335-1 |
IEC 60335-1 Fig. 10 |
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50-75 N | ||
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-100 N | EN 61032 Fig. 7 | IEC 60065 Fig. 3b |
SHORT TEST PIN |
EN 61032 Fig. 9 EN 60335-1 EN 60601-1 |
IEC 60335-1 Fig. 2 |
LONG TEST PIN | EN 61032 | IEC 61032 |
TEST MANDREL |
EN 61032 Fig. 16 EN 60335-1 |
IEC 60335-1 Fig. 3 |
TEST NEEDLE Ø 1 mm , force 1 N | CEI 23-50 Fig. 10 | IEC 883 |
TEST NEEDLE Ø 2, 5 mm , force 3 N | ||
SHORT CIRCUIT TESTER, 48 V. with signal light | EN 60335-1 par. 8.1 |
IEC 60529 par. 11.89 IEC 60598-1 par. 6.92 |
TEST SPHERE Ø 50 mm with handle |
EN 60529 EN 61032 Fig. 1 |
IEC 60529 IEC 61032 |
TEST NAIL to be applied to the rigid test finger | EN 60335-1 Fig. 7 | IEC 60335-1 Fig. 7 |
TEST ROD Ø 2, 5 mm , length 100 mm , with stopping ball Ø 35 mm |
EN 60529 EN 61032 Fig. 3 |
IEC 60529 IEC 61032 |
TEST ROD Ø 1 mm , length 100 mm , with stopping ball Ø 35 mm |
EN 60529 EN 61032 Fig. 4 |
IEC 60529 IEC 61032 |
test probe Ø 12 mm , length. 80 mm with dynamometric handgrip and reference marks to forces of 10-20-30 -40-50 N | EN 60950 Fig. 16 | IEC 61010- par. 8.1.1 |
SMALL FINGER PROBE Ø 8, 6 mm |
EN 61032 Fig. 12 EN 60335-2-75 |
|
SMALL FINGER PROBE ? 5, 6 mm |
EN 61032 Fig. 13 EN 60335-2-75 |
IEC61032 IEC60065 |
ACCESS PROBE TO HAZARDOUS FOOD WASTE DISPOSAL UNITS | EN 61032 | CEI IEC 61032, FIG. 14 – PROBE 31 |
TEST BAR WIDTH 50MM, 5MM THICK ,175MM LONG | EN61032 | IEC 61032 FIG17 PROBE43 |
TEST BAR WIDTH 3MM, 1MM THICK ,80MM LONG | EN61032 | IEC 61032 FIG10 PROBE14 |
TEST NEEDLE Ø 0.5 MM, 20MM LONG | EN61032 | IEC 61032 FIG11 PROBE17 |
"UL" FINGER PROBE |
ACCORDING TO UL 1026, FIG. 6.2 ,UL508 ,FIG.6.4, UL153,FIG23.1;UL 982, FIG. 7.1 UL507 FIG9.2, UL1310-1994 |
|
HAZARDOUS MOVING PARTS PROBE | UL507 FIG8.1, PA160B | |
RIGIDITY TEST ROD PROBE,Ø 25.4 MM | UL507 FIG8.2 S2140A | |
UNINSULATED LIVE PARTS PROBE | UL507 FIG1.1 | |
TACCESSIBILITY PROBE/WEDGE | UL 60950-1, FIG. NAF.2, FIG. NAF.3 | |
BLUNT-END PROBE | UL1310 FIG14.4(S3252) | |
ENAMELED WIRE PROBE |
UL1278 FIG 8.2(PA140A),UL398 FIG 8.2(PA170B) ,UL507(PA170D) |
|
TEST HOOK |
CEI EN 60601-1, FIG. 1 UL 6500, FIG. 8.2 |
|
ULTEST FINGER | ||
UL TEST PROBE | UL1287 FIG,10.1 | |
UL TEST PROBE | UL1287 FIG,10.2 | |
UL TEST PROBE | UL1287 FIG,10.3 | |
UL TEST PROBE | UL1287 FIG,10.4 | |
JOINTED iec test FINGER | IEC6 0335-2-14 | |
JOINTED IEC TEST FINGER (Ø 125MM) | ||
TEST PROBE PROBE32 | IEC61032 | |
IEC STEEL ROD Ø 4 MM, 100 MM LONG | EN61010-1 | EC60065 9.1.3, IEC1010 |
IEC STEEL ROD Ø 3 MM, 100 MM LONG | EN61010-1,CSA1010-1 | IEC1010, ,UL31010-1 |
TEST PORBE ABOUT IEC60950 | IEC60950 | |
TEST PORBE ABOUT IEC60601 | IEC60601 | |
TEST PORBE ABOUT IEC61010 | IEC61010 | |
TEST PORBE ABOUT IEC60335 | IEC60335 | |
TEST PORBE ABOUT IEC60529 |
IEC60529 |
Contact: Eason Wang
Phone: +86-13751010017
E-mail: sales@china-item.com
Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China